WARRANTY STATEMENT Thanks for purchasing the 3-Wheel Sliding vehicle product from our company,there is 6 months warranty from the date you purchase.Any un-void disaster, such as earth quake ...etc to cause the damage of this vehicle will not be covered under the warranty. The PU wheel and braking stopper is the consuming product and will not cover under the warranty.   ASSEMBLY Follwing the components list, take out the 3-wheel sliding vehicle from the carton box,and make sure all the components are right.             STEP 1: Press down the position nut, and plug the T-Bar into the front fork unit to where the position you want to be.(watch out not to clamp your hand)   STEP 2-1: Using customized tool tight up the T-Bar set to mainframe where the position tight and not moved.(Model:0800 Model:1000)             STEP 2-2: Adjust the quick release to where the position tight and not moved.(Model:1200)   STEP 3: See the diagram, put the both handle bar into the T-Bar where the position nuts set to the right position   CHECKING POINTS BEFORE RIDING » After assembling the 3-wheel sliding vehicle,First of all,check the left and right brake working and sensitive enough. » Secondly, check the left and right foot paddle to open and close three times to see whether the swing limited position 　working fine or not. » Third,check the rear wheel spin normal or not. » Finally,check every step to work fine before riding the 3-wheel vehicle.